If you are experiencing the Roku low power issue with your Roku device there are several reasons for this issue. Such reasons are faulty power outlet, faulty adapter, faulty cable and USB port issues. If you are searching for a method to fix this issue, then you are in the right place. This article includes some steps in the following section to fix this problem.

Roku is a hardware brand that creates digital media players. It allows its users to access media streaming websites. In May 2008, the first Roku model, which was developed in conjunction with Netflix, was made available to the public. In general, Roku gadgets are credited with the target of low-cost, small-form-factor set-top boxes for streaming media viewing. Also in addition to that the Roku devices are performing as a license platform middle for middleware for smart TVs.

How to fix Roku low power issue?

When you are using the Roku device it is one of the issues that you will encounter, is the Roku low power issue. Imagine that you are in the middle of a movie or TV show watch and suddenly your Roku device starts displaying this, massage on your screen and you couldn’t do anything to resume the movie. It is definitely a bitter experience for you when it happens.

Also alternative to the power massage the Roku device’s screen can indicate a red light to let you know that the device is low on power. The device’s screen colour which is white in default mode will indicate a dim light. In addition to that in some cases the red light indicator will show you that the device is getting too hot to operate.

Solution 01: Check the USB cables

In general, the Roku low power issue is always a result of a USB cable malfunction. If you are using a power cable other than the recommended power cable for the Roku device on the instructions given, can cause a low power input. This may cause the Roku load power issue for you. So if you want to get rid of this issue with the Roku device it is better to use the recommended cable for the Roku device.

Solution 02: Use other USB ports

In some cases, if you are using your Smart TV device to power the Roku device, then try to change the USB port instead of the previous port you used. Normally the power output from a USB port on any device varies if it has several ports with it. So instead of using the same USB port that gives the low power message you can use a different port for that. Sometimes this option helps its users to fix this issue.

Solution 03: Use a wall outlet

Normally the Roku streaming device uses has low power consumption compared to other streaming devices. When streaming 4K HDR videos on your Roku Ultra device it uses more than 4.5 Watts. Also when you are using the streaming stick it needs only 3 Watts of power to operate.

Also when the Roku device is not in use it consumes about 2 Watts of power which is a bit less than when it operates. So when the low power issue comes up, the main problem to that is the power supply from the TV’s USB connection.

Normally the Roku device has its own charger or power port. So you need to remove the USB cable from the TV device and connect the Roku power adapter to an external power source and connect the power cable to the power adapter.

Generally, it is better to use an external power source to power your Roku device to avoid the low power massage on your device. Normally with the Roku device a power adapter is given to you. Please use it to power the Roku device using an external power source in your home.

You can use any power source at your home. If the battery dies on the device it is better to replace it with a new one. If you need to buy one from the shop, please make sure that you are buying one of the compatible items for the device.

Solution 04: Plugged power adapter properly

When you are supplying power to the Roku device please make sure that all the ends of the USB cables fit into the ports well. Please make sure those ends are not loose. Also please make sure that the external power source is working well. Also when you are using a power adapter to power the device please make sure that it is not loose on the power source when you set it.

Solution 05: Remove power extension cables and HDMI extension cables

Normally the smart TV and the Roku device connect with each other using an HDMI cable and a power code. This leads to overheating of the device and this results in the power massage on the device screen. Also in some cases, this HDMI cable can be damaged for the time being. So it is better to remove those codes and cables from the device.

Solution 06: Update the Roku device

Normally with the device update the service provider always tries to fix the concerning issues to its users with their complaints. So if you want to get rid of these issues, please make sure that your device is up to date with its software. With these updates, the service providers always try to add new features and enhance security and update the settings to perform well. So if the issue is related to the software version you can fix it by updating the software.

Roku device normally updates the software automatically to its latest version. But it takes some time to update and while updating if the power goes out it stops.

Step 1: First, press the Home button on the Roku control.

Step 2: Then navigate to the Settings menu.

Step 3: Now navigate to System Settings.

Step 4: Then go to System Update.

Step 5: Now press Choose Now.

There are three ways to update the Roku device in case you failed to reach the homepage to update. Those ways are to press a series of buttons on the remote control, factory reset the device and if the remote has a button to reset the device press it.

Remote reset

In order to do this, you need to press a series of buttons on the remote.

Step 1: First, press the Home button 5 times.

Step 2: Now press Up once.

Step 3: Then press the Rewind button twice.

Step 4: Now press the Fast Forward button twice.

Factory reset

The factory reset should be done as a last resource. Because when it does all the data you saved will lose.

All the stored data will be deleted when you perform the factory reset on your Roku device. And after the reset process is over the device will change its settings to its default state and update the software to its latest version. Also while the reset process is ongoing all the hardware issues will be solved.

Step 1: First, press the Home button on the Roku control.

Step 2: Now access Settings.

Step 3: Then choose the System.

Step 4: Now click Advanced System Settings.

Step 5: Then select Factory Reset.

Step 6: Finally, to finish the reset, follow any instructions displayed on the screen.

Reset Button

Normally this button will do the same thing to the device as described previously. But in this case, it takes only one button on the remote to do this process. Also after this reset, the saved data will be lost and the device will turn its settings to its default state.

On your remote, there is a button called the reset. Please press it and hold it for a few seconds. Then the reset process will start and when it’s over the power indicator of the device will flash when it does please let go of the button.

Frequently Asked Questions

What does Roku’s low power mean?

This means that the device is not getting the power it needs to operate. This shows that if you are using one of the USB ports of the television device to power the Roku device, one of the USB ports you use is out of power or not working very well. So you can change the port you are using to power the Roku device or you can use the power adapter that comes with the Roku device and connect the device using the power adapter to a wall socket.

Where is the power setting on Roku?

To find this first you need to find the remote of the device and press the home button on it. Then on the screen, you will see a number of options and from that please press the settings option on the left of the screen. Then you need to go to the system, power and power on respectively. Then you will come up with a list of power options and from that, you can use the option that suits you the best.

Does a Roku power down by itself?

Normally a Roku device is designed to stay on and consume a little power for that. Also, it does not have a power button or a standby mode with it. Also in some cases, users plug the Roku device into the TV device and when the TV device is turned off the Roku device will automatically shut down. Also if you use the wall socket to power the device you have to unplug the power code to turn it off.

Which is better Roku or Firestick?

Compared to the Firestick device the Roku device has a wider selection of channels for its users. But both devices offer the most popular streaming services to their users. Such services are Netflix, Disney Plus, Amazon Prime, HBO Max and Hulu. In general, the Roku device offers its users around 3000 free channels. While the Firestick device offers around 200 channels to its users.